¡¡
¡¡ |
 |
|
 |
|
Phone: +86 (571)85241227 Fax: 87971046
e-mail: sales@huzhimpex.com |
|
|
 |
|
 HJ-1 |
|
| Why Magicoh HJ-1 |
|
|
| "Hydrostability" is a
unique requirement aquatic feed producers face, that is how to maintain the integrity of
pelleted and extruded feeds and baits in an aquatic environment. |
|
Most binders used for aquatic feed work great,
until they are exposed to water. Then, they fall apart, deteriorating rapidly, leaving costly
feed ingredients unused with the residue disolving in water and polluting pond bottoms.
It's money down the drain !!! |
|
 |
Magicoh™ HJ-1 provides a cost efficient
solution to your binder needs, which increases the hydrostability (water resistance) of your
aquatic feed and finally improves your return on investment. |
With Magicoh™ HJ-1, you can produce a feed that remains palatable
and usable long after other binders have fallen apart. That means more efficient use of
feed, decreased waste and decayed matter on pond bottoms to clean up.
|
|
| What Magicoh™ is |
|
| Magicoh™ HJ-1 is a
spray-dried urea-formaldehyde resin in powder form.It is recommended for use as feed binder in
the production of fish and shrimp feed , featuring excellent water tolerance and
is applicable in both cold and hot press systems for pelleted or extruded feeds. |
 |
|
| Tests on aquatic feed using Magicoh™
HJ-1 as a binder have proved Magicoh™ HJ-1: |
|
- Being environment-friendly.
- Cost save and function efficiently.
- Meet your rigid requirement to produce superior quality
aquatic feed.
- Being ideal for all aquatic environments.
- Long shelf life of 12 months.
|
Magicoh™ (Qiongbao®) are being
successfully used for over Twenty years worldwide in aquatic feeds that are pelleted, cubed,
or blocked. |
|
| ¡¡ |
4 hrs after pellets dried |
36 hrs after pellets dried |
72 hrs after pellets dried |
| 0.5% |
45 munites |
1.5 hrs |
>2.0 hrs |
| 0.6% |
45 munites |
2.5 -6.0 hrs |
3.0 - 8.0 hrs |
| 0.7% |
45 munites |
3.0 - 8.0 hrs |
4.0 - 12.0
hrs |
Table: Test result on water tolerance with Magicoh™
HJ-1 as feed binder (for your reference only)
Note :
|
| 1.-- |
The consumption level |
| 2.-- |
The duration between pellets finished and put into water. |
| 3.-- |
Water tolerance |
|
| How to Use It |
|
Used only as aquatic pellet binder. Mix in the fodder
before granulation at consumption rate of 0.4-0.7% of the finished pellets,and process
with standard pelleting or extruding operation. Storage of finished pellets
for suggested time (post cooling) can improve binding performance.
|
| Packaging |
|
2 kilogram each in a PP bag, then 10bags (20 kgs net)
packed in PP-kraft sack. |
|
|
|
|
|
|
|
|
|
|
|
